n ordering information sn C a 100 bf [example] (a) (b) (c) (a) series name sn : sn series (b) input voltage a : ac type d : dc type (c) nominal voltage 100 bf : 100 vac 200 bf : 200 vac 12/24 b : 12/24 vdc n features l i/o modules for interface between cpu and external input devices or loads l ultra slim and light weight, sil terminals type i/o modules for high density mounting size: 5 (w) 20 (l) 17 (h) mm weight: approximately 3.0 to 3.5 g l high isolation by employing photo-coupled devices (between input and output: 2,500 v rms) l long life and maintenance free l all solid state i/o module l compatible with ny relay size and terminals arrangement (only output module type) sn series solid state relay (i/o module) maximum load current 1 a 1 l input module
2 sn series (a) series name sn : sn series 3 : 3 vdc (only ac type) (b) nominal voltage (input side) 5 : 5 vdc 12 : 12 vdc 24 : 24 vdc (c) load voltage a : ac type d : dc type (d) load current 01 : 1 a (e) kinds of inverse connection ac type nil : with varistor protecting element nv: without varistor dc type nil : diode hz: zener diode ( f ) zero cross function (ac type) f : without zero cross function c : with zero cross function ( g) output polarity (dc type) nil : standard polarity r : reverse polarity ( h) switching speed (dc type) nil : standard t : high speed type ac input module dc input module item remarks 100 vac type 200 vac type 12/24 vdc type input input voltage range 80 to 132 vrms 9.6 to 28.8 vdc side rating input current approx. 7 marms power frequency range 47 to 63 hz must operate voltage (max.) 80 vrms 160 vrms 9.6 vdc must release voltage (max.) 30 vrms 60 vrms 5.0 vdc must release current (min.) 2 marms 1.5 ma output dc supply voltage 4 to 6 vdc side maximum output current 4 ma 0.4 ma v dd = 5 v output logic operate with negative true logic (active low) maximum operate time (max.) 25 ms 10 ms maximum release time (max.) 30 ms 10 ms insulation resistance (initial value) minimum 1,000 m (at 500 vdc) for input- dielectric strength 2,500 vrms 1 minute output operating temperature range C30 c to + 85 cno storage temperature range C40 c to +100 c frost case color weight approximately 2.0 g approximately 3.3 g n specifications ? input module (sn-( ) b type) sn C 12 d 01 hz C c r t [example] (a) (b) (c) (d) (e) ( f ) (g) (h) l output module approx. 5 ma (at 12 vdc) approx. 10 ma (at 24 vdc) v dd w white yellow 160 to 265 vrms
3 sn series item ac output module dc output module remarks input nominal voltage (dc) 3 v, 5 v, 12 v, 24 v 5 v, 12 v, 24 v side operate voltage range 20% of nominal voltage must operate voltage max.80% of nominal voltage must release voltage minimum 1 vdc (minimum 0.5 v*) *3 vdc type 3 vdc type 130 w 180 w 5 vdc type 330 w 470 w 390 w input impedance ( 10%) 12 vdc type 1,0k w 1,5k w 1,2k w 24 vdc type 2,2k w 3,0k w 2.4k w output load voltage range 24 to 265 vrms 3 to 30 vdc side maximum load current 1.0 arms 1.0 a see characteristic data minimum load current 10 marms 1 ma switching current 50 a (60 hz) 3 a (10 ms) max. off-state leakage current 1.5 marms (at 100 vrms 60 hz) 0.1 ma (at 30 vdc) 3.0 marms (at 200 vrms 60 hz) max. on-state voltage drop 1.2 vrms 1.2 v at max. load current maximum operate time (max.) 1 ms 1 ms maximum release time 1/2 cycle + 1ms 1 ms insulation resistance minimum 1,000 m w (at 500 vdc) for input-output dielectric strength 2,500 vrms 1 minute operating temperature range C30 c to + 85 cno storage temperature range C40 c to +100 c frost case color black red weight approximately 3.5 g approximately 2.9 g ? output module standard type with zero cross without zero cross 1/2 cycle 1 ms
4 sn series item ac output module remarks input nominal voltage (dc) 5 v, 12 v, 24 v side operate voltage range 20% of nominal voltage must operate voltage 80% of nominal voltage must release voltage minimum 1 v 5 vdc type 330 w 10% input impedance 12 vdc type 1,0 k w 10% 24 vdc type 2,0 k w 10% output load voltage dc3 to 30v side maximum load current 1.0 a see characteristic data minimum load current 1 ma switching current 3 a (10 ms) max. off-state leakage current 0.1 ma (at 30 vdc) max. on-state voltage drop 1.2 v maximum operate time max. 5 m s maximum release time max. 25 m s insulation resistance minimum 1,000 m w (at 500 vdc) for input-output dielectric strength 2,500 v rms 1 minute operating temperature range C40 c to + 100 c storage temperature range C30 c to + 85 c case color red weight approximately 2.9 g at dc 5 v 0.1a ? output module high speed switching type at max. load current
5 sn series n block diagram ? input module ? output module load insulation circuits input/output waveform (resistive load) photo-transistor coupler dc logic output photo-transistor coupler load insulation circuits input/output waveform (resistive load) ac photo-triac coupler dc photo-transistor coupler n characteristic data ? output module 3 v dd 4 out 5 gnd 1(~) input terminal photo-transistor coupler input circuit buffer circuit ac imput circuit condenser input input terminal 3 v dd 4 out 5 gnd 2(~) 1 (+/? 2 (+/? ( ) buffer circuit output terminal output terminal photo-transistor coupler on off ? ? input signal output signal ? ? on off input signal output signal 3+ input terminal input circuit photo-triac coupler photo-transistor coupler input circuit 4 3+ input terminal output terminal output terminal 4 trigger circuit drive circuit snubber circuit varistor output transistor inverse connection protecting diode 1 2 ~ ~ +1 ? on off source voltage of load input signal load current on off input signal load current * ac type without varistor / dc type with zenor diode available.
6 sn series n reference data l input module l output module distribution of operate & release voltage (ac type) high temperature switching test (ac type) high temperature continuous operating test (ac type) distribution of operate & release voltage (ac type) distribution of operate & release voltage (dc type) distribution of on-state voltage drop (ac type)
7 sn series n dimensions l dimensions l schematics (bottom view) l pc board mounting hole layout (bottom view) sn-a ( ) type (input module) sn-d ( ) type (input module) sn-a ( ) type (output module) sn-( ) d, ( )d ( ) r type (output module) dotted line : socket mounting sn-( )a-s type dotted line : socket mounting sn-( )d-s type unit: mm * reverse polarity type available
8 sn series n socket dimensions n notes 1. polarity of terminals is pre-determined. please design your circuit accordingly. 2. socket ordering code: jl-5n 3. standard ic socket is not recommended. please use socket jl-5n. 4. when switching inductive load by ac output module without varistor, please connect a varistor as shown in drawing below. 5. ac input module has inside logic ic. please connect bypass condenser (approx. 0.01 m ) at pivotal points between vdd and gnd. (conform to general handling instructions for logic ic.) n socket pc board mounting hole layout (bottom view) unit: mm ssr 23 1 4 load varistor load power source ? 2003 fujitsu components america, inc. all company and product names are trademarks or registered trademarks of their respective owners. rev. 02/18/2003 japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: marcom@fcai.fujitsu.com web: www.fcai.fujitsu.com europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: www.fceu.fujitsu.com asia pacific fujitsu components asia ltd. 102e pasir panjang road #04-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com fujitsu components international headquarter offices
|
